Window glass
The window glass can normally be cleaned using only a sponge and water.
Glass cleaner can be used to remove oil, grease, dead insects, etc. After washing the glass, wipe dry with a clean, dry, soft cloth. Never use the same cloth to wipe the window glass as would be used to wipe the paintwork; wax from the painted surfaces could adhere to the glass and reduce its transparency and visibility.
Note
► To clean the inside of the rear window, always use a soft cloth and wipe the window glass along the demister heater element so as not to cause damage.
See also:
Operating the system in automatic mode
In normal conditions, use the system in the AUTO mode and follow these procedures:
1. Set the blower speed selection dial to the “AUTO” position.
2. Set the temperature control dial to the de ...
Operating the heater system
Heating
Set the mode selection dial to the
position and set the air selection
switch (A) to the outside position.
Turn the temperature control dial clockwise or anticlockwise to the desired temp ...
Automatically stopping the engine
The Auto Stop & Go (AS&G) system is automatically activated when the ignition
switch is turned to the “ON” position. You can deactivate the system by pressing
the “Auto Stop & Go ...