Head restraintsHead restraints  - Seat and seat belts - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

WARNING:

● Driving without the head restraints in place can cause you and your passengers serious injury or death in an accident. To reduce the risk of injury in an accident, always make sure the head restraints are installed and properly positioned when the seat is occupied.

● Never place a cushion or similar device on the seatback.

This can adversely affect head restraint performance by increasing the distance between your head and the restraint.

To adjust height

Adjust the head restraint height so that the centre of the Head restraint is

Adjust the head restraint height so that the centre of the Head restraint is as close as possible to eye level to reduce the chances of injury in the event of collision. Any person too tall for the Head restraint to reach their seated eye level, should adjust the restraint as high as possible.

To raise the head restraint, move it upward. To lower the restraint, move it downward while pushing the height adjusting knob (A) in the direction of the arrow. After adjustment, push the head restraint downward and make sure that it is locked.

To remove

To remove the head restraints, lift the head restraint with the height adjusting

To remove the head restraints, lift the head restraint with the height adjusting knob (A) pushed in.

Installation

CAUTION:

● Confirm that the height adjusting knob (A) is correctly adjusted as shown in the illustration, and also lift the head restraints to ensure that they do not come out of the seatback.

To install the head restraints, first confirm that they are facing the correct

To install the head restraints, first confirm that they are facing the correct direction, and then insert them into the seatback while pressing the height adjusting knob (A) in the direction indicated by the arrows.

CAUTION:

● The head restraints for the seats differ in shape and size. When installing head restraints, make sure the head restraints are fitted in their respective seats.

Making a luggage room

    See also:

    Operation of the outside rear-view mirrors (Vehicles equipped with mirror retractor switch)
    To fold Within 30 seconds of locking the doors and rear hatch using the LOCK switch (1), press the LOCK switch twice rapidly to fold the outside rear-view mirrors. To extend Within 30 seconds of ...

    Engine overheating
    When the engine is overheating, the information screen in the multi-information display will be interrupted and the engine coolant temperature warning display will appear. Also will blink. If th ...

    Wiper blades
    Use a soft cloth and glass cleaner to remove grease, dead insects, etc., from the wiper blades. Replace the wiper blades when they no longer wipe properly. ...