Hazard warning flasher switchHazard warning flasher switch  - Instruments and controls - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

Use the hazard warning flasher switch when the vehicle has to be parked on the

Use the hazard warning flasher switch when the vehicle has to be parked on the road for any emergency.

The hazard warning flashers can always be operated, regardless of the position of the ignition switch.

Push the switch to turn on the hazard warning flashers, all turn signal lamps flash continuously. To turn them off, push the switch again.

    See also:

    Lamp monitor buzzer
    [When the engine was started using the key] If the driver’s door is opened when the key is in the “LOCK” or “ACC” position or removed from the ignition switch while the lamps are on, a b ...

    To lock or unlock with the key
    1- Lock 2- Unlock Note ► On vehicles equipped with the central door lock switch, when locking or unlocking with the key, only the driver’s door will be locked or unlocked. To lock or ...

    Running-in recommendations
    During the running-in period for the first 1,000 km, it is advisable to drive your new vehicle using the following precautions as a guideline to aid long life as well as future economy and perform ...