Parking brakeParking brake  - Starting and driving - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

To park the vehicle, first bring in to a complete stop, fully engage the parking brake.

To apply

1- Pull the lever up without pushing the button at the end of hand grip.

1- Pull the lever up without pushing the button at the end of hand grip.

To release

1- Pull the lever up slightly.

1- Pull the lever up slightly.

2- Push the button at the end of hand grip.

3- Push the lever downward.

CAUTION:

CAUTION:

● Before driving, be sure that the parking brake is fully released and brake warning lamp is off.

If you drive without the parking brake fully released, “RELEASE PARKING BRAKE” will appear on the information screen in the multi-information display.

If a vehicle is driven without releasing the parking brake, the brakes will be overheated, resulting in ineffective braking and possible brake failure.

    See also:

    Engine compartment
    Clean the engine compartment at the beginning and end of winter. Pay particular attention to flanges, crevices and peripheral parts where dust containing road chemicals and other corrosive materia ...

    Clutch fluid
    Petrol-powered vehicle To check the clutch fluid To check the clutch fluid The clutch fluid in the master cylinder should be checked when performing other underhood services. In addition, the syst ...

    Rear combination lamps
    Hatchback Remove the lid. Turn the bulb socket anti-clockwise to remove it. And remove it anti-clockwise while pressing it inward. 1- Tail lamp 2- Rear turn-signal lamp 3- Stop lamp Sedan T ...