Cup holderCup holder  - For pleasant driving - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

CAUTION:

● Do not drink beverages while driving. This is distracting and could cause an accident.

For the driver’s seat

There is a built-in cup holder in the instrument panel on the driver’s side.

There is a built-in cup holder in the instrument panel on the driver’s side.

Pressing the centre of the lid causes the tray to pop out a little.

Pull it out completely for use.

NOTE:

● When not using the holder, push the holder to stow it away.

For the front seat

The cup holder is located in front of the floor console box.

The cup holder is located in front of the floor console box.

For the second seat

1. Allow the armrest to drop down.

1. Allow the armrest to drop down.

2. Open the lid (A) while holding the side face of the lid with your hand.

2. Open the lid (A) while holding the side face of the lid with your hand.

    See also:

    Reversing sensor system detection areas
    Depending on whether the vehicle is equipped with a towing bar, you can change the reversing sensor system between the standard mode and the towing bar mode. The towing bar mode changes the system ...

    Maximum towable weight with brake and maximum trailer-nose weight
    Never exceed the maximum towable weight with brake and the maximum trailer-nose weight as listed in the specifications. (Refer to “Vehicle weight”.) If you tow a trailer at an altitude of more ...

    Weatherstripping
    To prevent freezing of the weatherstripping on the doors, bonnet, etc., they should be treated with silicone grease. ...