Tools and jackTools and jack  - For emergencies - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

Storage

The tools and jack are stowed on the right side of the luggage area.

The storage location of the tools and jack should be remembered in case of an emergency.

1- Jack.

1- Jack.

2- Tools.

Tools

1- Tool case.

1- Tool case.

2- Wheel nut wrench.

3- Jack bar.

4- Towing hook.

Jack

To remove

1. Turn the knob (A) anticlockwise and remove the lid (B).

1. Turn the knob (A) anticlockwise and remove the lid (B).

2. Remove the fastening band (C) and remove the tools.

2. Remove the fastening band (C) and remove the tools.

3. Retract the jack and remove it from its installation fitting (D).

3. Retract the jack and remove it from its installation fitting (D).

To store

1. Retract the jack, then return it to its original position.

2. Extend the jack and firmly secure it.

3. Return the tools to the tool bag, return it to its original position, and

3. Return the tools to the tool bag, return it to its original position, and firmly fasten with the fastening band.

4. Install the lid and turn the knob clockwise.

    See also:

    Other interrupt displays (when the ignition switch is “ON”)
    The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further details. This informs you that a periodic inspection is due. ...

    To play from an iPod
    1. Press the PWR button to turn on the audio system. The system turns on in the last mode used. 2. Connect your iPod to the USB input terminal. Refer to “How to connect an iPod”. 3. Press the ...

    To unfasten
    Hold the latch plate and push the button on the buckle. Note ► As the belt retracts automatically, keep holding the latch plate while retracting so that the belt stows slowly. Failure to ...