Parking brake break-inParking brake break-in  - Maintenance - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

Break-in the parking brake linings whenever the brake performance of the parking brake is insufficient or whenever the parking brake linings and/or discs are replaced, in order to assure the best brake perfomance.

This procedure is described in the vehicle service manual and can be carried out by a MITSUBISHI MOTORS Authorised Service Point.

    See also:

    Brake assist system
    The brake assist system is a device assisting drivers who cannot depress the brake pedal firmly when it is necessary to do so (such as in emergency stop situations) and provides greater braking fo ...

    Twin Clutch SST control mode
    Select the control mode from the following two types to suit the driving conditions. Note ► When continuously driving on closed circuit tracks or at other locations where the engine is op ...

    To remove the spare wheel
    1. Lift up the luggage floor board. 2. To remove the spare wheel, remove the installation clamp (A) by turning it anticlockwise. NOTE • Put the spare wheel under the vehicle body near the ja ...