General maintenanceGeneral maintenance  - Maintenance - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

Fuel, engine coolant, oil and exhaust gas leakage

Look under the body of your vehicle to check for fuel, engine coolant, oil and exhaust gas leaks.

WARNING:

● If you see a suspicious fuel leak or if you smell fuel, do not operate the vehicle; call your MITSUBISHI MOTORS Authorised Service Point for assistance.

Exterior and interior lamp operation

Operate the combination lamp switch to check that all lamps are functioning properly.

If the lamps do not illuminate, the probable cause is a blown fuse or defective lamp bulb. Check the fuses first. If there is no blown fuse, check the lamp bulbs.

For information regarding the inspection and replacement of the fuses and the bulbs, refer to “Fuses” and “Replacement of lamp bulbs”.

If the fuses and bulbs are all OK, we recommend you to have your vehicle checked and repaired.

Meter, gauge and indicator/warning lamps operation

Start the engine and check the operation of all instruments, gauges and indicator and warning lamps.

If there is anything wrong, we recommend you to have your vehicle inspected.

Hinges and latches lubrication

Check all latches and hinges, and, if necessary, have them lubricated.

    See also:

    Spare wheel
    Check the air pressure in the spare tyre weekly, making sure it is ready for emergency use. Maintaining the spare wheel at the highest specified air pressure will ensure that it can always be us ...

    To install
    1. Remove any foreign material in or around the connectors and ensure the vehicle seat belt is in its normal storage position. 2. Push the child restraint system’s connectors (A) into the slit (B ...

    Automatic mode
    The automatic adjustment mode can set the local time automatically by using the signal from local RDS stations. In this mode, CT (A) is shown in the display. Refer to “Radio data system (RDS)” ...