Fusible linksFusible links  - Maintenance - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

The fusible links will melt to prevent a fire if a large current attempts to flow through certain electrical systems.

In case of a melted fuse link, we recommend you to have your vehicle inspected.

For the fusible links, please refer to “Fuse load capacity”.

WARNING:

● Fusible links must not be replaced by any other device. Failing to fit the correct fusible link may result in fire in the vehicle, property destruction and serious or fatal injuries at any time.

    See also:

    Checking battery electrolyte level
    The electrolyte level must be between the specified limit on the outside of the battery. Replenish with distilled water as necessary. The inside of the battery is divided into several compartment ...

    During cold weather
    The capacity of the battery is reduced at low temperatures. This is an inevitable result of its chemical and physical properties. This is why a very cold battery, particularly one that is not fully ...

    Disconnection and connection
    To disconnect the battery cable, stop the engine, first disconnect the negative (-) terminal and then the positive (+) terminal. When connecting the battery, first connect the positive (+) terminal ...