Vehicle labelingVehicle labeling  - Specifications - Mitsubishi Outlander Owner's Manual - Mitsubishi Outlander

1-Vehicle identification number

1-Vehicle identification number

The vehicle identification number is stamped on the bulkhead as shown in the illustration.

2-Vehicle information code plate

The vehicle information code plate is riveted as shown in the illustration.

The plate shows model code, engine model, transmission model and body colour code, etc.

Please use this number when ordering replacement parts.

1- Model code.

1- Model code.

2- Engine model code.

3- Transmission model code.

4- Body colour code.

5- Interior code.

6- Option code.

7- Exterior code.

Vehicle identification number plate (RHD vehicles only)

This is stamped on the number plate riveted to the left front corner of the instrument

This is stamped on the number plate riveted to the left front corner of the instrument panel pad. It is visible from outside of the vehicle through the windscreen.

Engine number

: Front of the vehicle.

: Front of the vehicle.

The engine number is stamped on the engine cylinder block as shown in the illustration.

    See also:

    Engine coolant temperature display
    This indicates the engine coolant temperature. If the coolant becomes hot, will blink. Pay careful attention to the engine coolant temperature display while you are driving. Caution ► ...

    Wiper blade rubber replacement
    Windscreen wiper blades 1. Lift the wiper arm off the windscreen. 2. Pull the wiper blade until its stopper (A) disengages from the hook (B). Pull the wiper blade further to remove it. NOTE в ...

    Side air bag system (front seat only)
    The side air bags are contained in the driver and front passenger seatbacks. The label shown here is attached to the seatbacks with a side air bag. The side air bag is designed to inflate only o ...