At extreme cold ambient temperature
If the engine won’t start, depress the accelerator pedal about halfway while cranking the engine. Once the engine starts, release the accelerator pedal.
CAUTION
When starting the engine, make sure that you press on the brake pedal. At extreme cold ambient temperature, move your foot to the brake pedal immediately after the engine has started.
See also:
Bulb capacity
When replacing a bulb, use a new bulb with the same wattage and colour.
Outside
Except for vehicles equipped with high intensity discharge headlamps
1. Front turn-signal lamps: 21 W (WY21W)
2. H ...
Turn-signal indication lamps/ Hazard warning indication lamps
These indication lamps blink in the following situations.
► When the turn-signal lever is moved to activate a turn-signal lamp.
Refer to “Turn-signal lever”.
► When the hazard war ...
Bending lamps (Adaptive Front lighting System (AFS)) (for vehicles equipped
with high intensity discharge headlamps)
1. When replacing the bulb on the right side of the vehicle, remove the bolt
(A) holding down the washer tank spout and move the spout towards the rear of the
vehicle.
: Front of the vehicle
2 ...
