To operate without using the keyless operation functionTo operate without using the keyless operation function  - Keyless operation system - Locking and unlocking - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Emergency key

The emergency key is built into the keyless operation key. If the keyless operation function cannot be used, for example because the keyless operation key battery has worn out or the vehicle battery is flat, you can lock and unlock the doors and start the engine with the emergency key. To use the emergency key (1), unlock the lock knob (2) and remove it from the keyless operation key (3).

Note

► Only use the emergency key for emergencies. Note

► Only use the emergency key for emergencies.

If the keyless operation key battery wears out, replace it as quickly as possible so that you can use the keyless operation key.

► After using the emergency key, always return it into the keyless operation key.

    See also:

    Starting
    Tips for starting • Do not operate the starter motor continuously longer than 10 seconds; doing so could run down the battery. If the engine does not start, turn the ignition switch back to “ ...

    Emergency starting
    If the engine cannot be started because the battery is weak or dead, the battery from another vehicle can be used with jumper cables to start the engine. WARNING To start the engine by use of jump ...

    Active Stability Control (ASC) OFF display screen
    This is displayed when the Active Stability Control (ASC) is turned off with the ASC OFF switch. If there is a fault with the ASC, the ASC OFF display is shown. Refer to ““ASC OFF” switch ...