Seat and seat beltsSeat and seat belts  - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

To change a tyre
1. On vehicles equipped with wheel covers, first remove the covers (refer to “Wheel covers”). Then loosen the wheel nuts a quarter turn with the wheel nut wrench. Do not remove the wheel nuts ...

Starting the engine (petrol-powered vehicles)
The starting procedure is as follows: 1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. (M/T) Note υ ...

Card holder
Cards can be slipped into the holder (A) on the back of the sun visor. ...