Cargo loadsCargo loads - Starting and driving - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

See also:

Information screen (when the ignition switch is turned from the “LOCK” position to the “ON” position or the operation mode is changed from OFF to ON)
When the ignition switch is turned to the “ON” position or the operation mode is put in ON, the display screen switches in the following order. 1- Screen when the ignition switch or the opera ...

Active Stability Control (ASC) OFF display screen
This is displayed when the Active Stability Control (ASC) is turned off with the ASC OFF switch. If there is a fault with the ASC, the ASC OFF display is shown. Refer to ““ASC OFF” switch ...

Starting
Tips for starting ► Do not operate the starter motor continuously longer than 10 seconds; doing so could run down the battery. If the engine does not start, turn the ignition switch back to ...