Card holder
Cards can be slipped into the holder (A) on the back of the sun visor.

See also:
Roof drip moulding
When installing the roof carrier, remove the roof drip moulding caps.
1. Open the cover (A) and remove the screws using a Philips screwdriver. 2.
Remove the caps by sliding them.
After removal o ...
Dipper (High/Low beam change)
When the lamp switch is in the
position, the beam changes from high to low (or low to high) each time the lever
is pulled fully (1). While the highbeam is on, the high-beam indication lamp in
t ...
Rear fog lamp
1. Remove the socket and bulb assembly by turning it anticlockwise.
2. Remove the bulb by pulling it out.
3. To install the bulb, perform the removal steps in reverse. ...
