Light bulb position (Front/ Rear)Light bulb position (Front/ Rear)  - Light bulbs - Maintenance - Kia Sportage - Fifth generation (NQ5) - (2022-2023) - Owner's Manual - Kia Sportage - 5 generation (NQ5)

Light bulb position (Front)

Headlamp - Type A
Headlamp - Type A

Headlamp - Type B
Headlamp - Type B

Fog lamp
Fog lamp

  1. Headlamp (Low) (LED type)
  2.  Headlamp (High) (LED type)
  3. Front turn signal lamp (Bulb type)
  4. Front turn signal lamp (LED type)
  5. Day time running lamp/Position lamp (LED type)
  6. Front fog lamp (LED type)

Light bulb position (Rear)

Rear combination lamp - Type A
Rear combination lamp - Type A

Light bulb position (Rear)

Rear combination lamp - Type B
Rear combination lamp - Type B

Light bulb position (Rear)

  1. Stop lamp (LED type)
  2. Stop lamp (Bulb type)
  3. Rear turn signal lamp (LED type)
  4. Rear turn signal lamp (Bulb type)
  5. Tail lamp (LED type)
  6. High mounted stop lamp (LED type)
  7. License plate lamp (Bulb type)
  8. Backup lamp (LED type)
  9. Rear side marker lamp (LED type)

Light bulb position (Side) (if equipped)

Light bulb position (Side) (if equipped)

  1. Side repeater lamp (LED type)

Replacing lights (LED type)

If the LED lamp does not operate, have your vehicle checked by an authorized Kia dealer. The LED lamp cannot be replaced as a single component because it is an integrated unit. The LED lamp has to be replaced with the unit.

A skilled technician should check or repair the LED lamp, for it may damage related parts of the vehicle.

    See also:

    Changing the time until “REST REMINDER” is displayed
    The time until the display appears can be changed. 1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu screen. Refer ...

    How to repeat the same track
    You can repeatedly listen to the same track by pressing the RPT button (10). Press the RPT button, and the RPT indicator (15) will come on. To release, press the button again. How to use the SCAN b ...

    To listen to a tape
    1- Cassette slot 2- TAPE button 3- Cassette eject button 4/5- PROG (Program selector, Fast-forward/Fast-rewind) buttons 6- MTL (Tape selector) button 7- (Dolby noise reduction) button 8- Tape ...