On a snow-covered or frozen
► When driving on a snow-covered or frozen road, it is recommended that you use snow tyres or tyre chains. Refer to the “Snow tyres” and “Tyre chains” sections.
► Avoid high-speed operation, sudden acceleration, abrupt brake application and sharp cornering.
► Depressing the brake pedal during travel on snowy or icy roads may cause tyre slippage and skidding. When traction between the tyres and the road is reduced the wheels may skid and the vehicle cannot readily be brought to a stop by conventional braking techniques. Braking will differ, depending upon whether you have anti-lock brake system (ABS). As your vehicle is equipped with ABS, brake by pressing the brake pedal hard, and keeping it pressed.
► Allow extra distance between your vehicle and the vehicle in front of you, and avoid sudden braking.
► Accumulation of ice on the braking system can cause the wheels to lock. Pull away from a standstill slowly after confirming safety around the vehicle.
Caution
► Do not press the accelerator pedal rapidly.
If the wheels break free of the ice, the vehicle could suddenly start moving and
possibly cause an accident.
See also:
Selector lever positions (Main gate)
“P” PARK
This position locks the transmission to prevent the vehicle from moving. The
engine can be started in this position.
“R” REVERSE
This position is to back up.
Caution
► N ...
Manual type
Operate the lever repeatedly to raise or lower the seat.
1- Raise
2- Lower ...
Parking
To park the vehicle, first bring it to a complete stop, fully engage the parking
brake and then move the selector lever to the “P” (PARK) position.
If you are going to leave the vehicle unatten ...