Plastic, vinyl leather, fabric and flocked partsPlastic, vinyl leather, fabric and flocked parts  - Cleaning the interior of your vehicle - Vehicle care - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1. Gently wipe off with gauze or other soft cloth soaked with a 3 % aqueous solution of neutral detergent.
2. Dip cloth in fresh water and wring out well.

Using this cloth, wipe off the detergent thoroughly.

► Do not use cleaners, conditioners, and protectants containing silicons or wax. Note

► Do not use cleaners, conditioners, and protectants containing silicons or wax.
Such products, when applied to the instrument panels or other parts, may cause reflections on the windscreen and obscure vision.
Also, if such products get on the switches of the electrical accessories, it may lead to failure of these accessories.

    See also:

    Starting the engine (diesel-powered vehicles)
    1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. Note ► On vehicles with the Auto Stop & Go ( ...

    Starting the engine (diesel-powered vehicles)
    1. Fasten the seat belt. 2. Make sure the parking brake is applied. 3. Depress and hold the brake pedal. 4. Fully depress the clutch pedal. Note ► On vehicles with the Auto Stop & Go ( ...

    To increase the set speed
    There are 2 ways to increase the set speed. “ACC RES” switch Press and hold the “ACC RES” switch (C) while driving at the set speed, and your speed will then gradually increase. When you ...