Genuine leather
1. Gently wipe off with gauze or other soft cloth soaked with a 5 % aqueous solution of neutral detergent.
2. Dip cloth in fresh water and wring it out well. Using this cloth, wipe off the detergent thoroughly.
3. Apply leather protecting agent to the genuine leather surface.
Note
► If genuine leather is wet with water or is washed in water, wipe off water
as quickly as possible with a dry, soft cloth. If left damp, mildew may grow.
► The genuine leather surface may be damaged if a nylon brush or synthetic fibre
is rubbed hard against it.
► Organic solvents such as benzine, kerosene, alcohol and petrol, acid or alkaline
solvents may discolour the genuine leather surface.
Be sure to use neutral detergents.
► Remove dirty patches or oil substances quickly as they can stain genuine leather.
► The genuine leather surface may harden and shrink if it is exposed to direct sun
for long hours. When your vehicle is parked, place it in the shade as much as possible.
► When the temperature of the vehicle interior rises in summer, vinyl products left
on the genuine leather seat may deteriorate and stick to the seat.
See also:
Four-Cylinder Power (Or Lack Thereof)
As mentioned, the Outlander's base powertrain is a letdown. The
168-horsepower, 2.4-liter four-cylinder teams with a continuously variable
automatic transmission, and the results are uninspiring, ...
Wheel condition
1- Location of the tread wear indicator
2- Tread wear indicator
Check the tyres for cuts, cracks and other damage.
Replace the tyres if there are deep cuts or cracks.
Also check each tyre for pi ...
Other interrupt displays (when the ignition switch is “ON”)
The operation status of each system is displayed on the information screen. Refer
to the appropriate page for the system for further details.
This informs you that a periodic inspection is due.
...