Aluminium wheelsAluminium wheels - Cleaning the exterior of your vehicle - Vehicle care - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1. Remove dirt using a sponge while sprinkling water on the wheel.

2. Use neutral detergent on any dirt that cannot be removed easily with water.

Rinse off the neutral detergent after washing the wheel.

3. Dry the wheel thoroughly using a chamois leather or a soft cloth.

► Do not use a brush or other hard implement on the wheels. Caution

► Do not use a brush or other hard implement on the wheels.
Doing so could scratch the wheels.
► Do not use any cleaner that contains an abrasive substance or is acidic or alkaline.
Doing so could cause the coating on the wheels to peel or become discoloured or stained.
► Do not directly apply hot water using a steam cleaner or by any other means.
► Contact with seawater and road deicer can cause corrosion. Rinse off such substances as soon as possible.

    See also:

    To resume the set speed
    If the set speed driving is deactivated by the condition described in “To deactivate”, you can resume the previously set speed by pressing the “ACC RES” switch (C) while driving at a speed o ...

    Radio data system (RDS)
    1- PWR (On-off) switch 2- TP (Traffic program) button 3- PTY (Program type) button 4- U/M/L (UKW/MW/LW selection) button 5- TUNE/SEEK (Down-step/Downseek) button 6- TUNE/SEEK (Up-step/Up-seek) b ...

    Manual transmission
    The shift pattern is shown on the gearshift lever knob. During start-up, fully depress the clutch pedal and shift into 1st gear or “R” (Reverse) position. Then gradually release the clutch peda ...