Engine oil

See also:

Dipper (High/Low beam change)
When the lamp switch is in the position, the beam changes from high to low (or low to high) each time the lever is pulled fully (1). While the highbeam is on, the high-beam indication lamp in t ...

To check the fluid level
The fluid level must be between the “MAX” and “MIN” marks on the reservoir. The fluid level is monitored by a float. When the brake fluid level falls below the “MIN” mark, the brake f ...

Tools and jack
The storage location of the tools and jack should be remembered in case of an emergency. Location 1- Tools 2- Jack Tools 1- Tool bag 2- Wheel nut wrench 3- Bar Jack 1- To remove Turn th ...