Diesel-powered vehiclesDiesel-powered vehicles  - Selection of engine oil - Engine oil - Maintenance - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

► Select engine oil of the proper SAE viscosity number according to the atmospheric

► Select engine oil of the proper SAE viscosity number according to the atmospheric temperature.

► Use engine oil conforming to the following classification: • ACEA classification:
“For service C1, C2, C3 or C4”
• JASO classification:
“For service DL-1”
If those classifications are not available, contact a MITSUBISHI MOTORS Authorized Service Point.

► Use of additives is not recommended since they may reduce the effectiveness Note

► Use of additives is not recommended since they may reduce the effectiveness of additives already included in the engine oil. It may result in failure of the mechanical assembly.

    See also:

    Average fuel consumption
    This value shows the average fuel consumption (in L/100 km or mpg) since the display was reset. If you reset the display at the time when you want to start the measurements, average fuel consump ...

    Tyre inflation pressure
    Check the tyre inflation pressure of all the tyres while they are cold: if insufficient or excessive, adjust to the specified value. After the tyre inflation pressure has been adjusted, check th ...

    Carrying children in the vehicle
    ► Never leave your vehicle unattended with the key and children inside the vehicle. Children may play with the driving controls and this could lead to an accident. ► Make sure that infa ...