To check the fluid levelTo check the fluid level  - Brake fluid/Clutch fluid - Maintenance - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The fluid level must be between the “MAX” and “MIN” marks on the reservoir.

The fluid level is monitored by a float. When the brake fluid level falls below

The fluid level is monitored by a float. When the brake fluid level falls below the “MIN” mark, the brake fluid warning lamp lights up.

The fluid level falls slightly with wear of the brake pads, but this does not indicate any abnormality.

If the fluid level falls markedly in a short length of time, it indicates leaks from the brake system.

If this occurs, we recommend you to have the vehicle checked.

    See also:

    To adjust seat cushion height (driver’s side only)
    Seat cushion height can be adjusted. To alter the height of the front of seat cushion 1- Raise 2- Lower To alter the height of the rear of seat cushion 3- Raise 4- Lower ...

    Wiper blade rubber replacement
    If the blades are frozen to the windscreen or rear window, do not operate the wipers until the ice has melted and the blades are freed, otherwise the wiper motor may be damaged. Windscreen wiper ...

    Interrupt display screen (when the ignition switch or the operation mode is OFF)
    When there is information to be announced, such as lamp reminders, the buzzer sounds and the multiinformation display switches to the warning display screen. Refer to the appropriate page and take ...