Wiper blade rubber replacementWiper blade rubber replacement  - Maintenance - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

If the blades are frozen to the windscreen or rear window, do not operate the wipers until the ice has melted and the blades are freed, otherwise the wiper motor may be damaged.

Windscreen wiper blades

1. Lift the wiper arm off the windscreen.
2. Pull the wiper blade until its stopper (A) disengages from the hook (B). Then, pull the wiper blade further to remove it.

Note

► Do not allow the wiper arm to fall onto the windscreen; it could damage the Note

► Do not allow the wiper arm to fall onto the windscreen; it could damage the glass.

3. Attach the retainers (C) to a new wiper blade.

4. Insert the wiper blade into the arm, starting with the opposite end of the

4. Insert the wiper blade into the arm, starting with the opposite end of the blade from the stopper. Make sure the hook (B) is fitted correctly in the grooves in the blade.

► If retainers are not supplied with the new wiper blade, use the retainers from Note

► If retainers are not supplied with the new wiper blade, use the retainers from the old blade.

5. Push the wiper blade until the hook (B) engages securely with the stopper (A).

Rear window wiper blades

Rear window wiper blades

1. Lift the wiper arm off the window glass.
2. Pull the wiper blade downward to disengage it from the stopper (A) at the end of the wiper arm. Pull the wiper blade further to remove it.
3. Slide a new wiper blade through the hook (B) on the wiper arm.

Note

► Do not allow the wiper arm to fall onto the window glass; it could damage the Note

► Do not allow the wiper arm to fall onto the window glass; it could damage the glass.

4. Firmly insert the retainer (C) into the groove (D) in the wiper blade.

Refer to the illustration to ensure that the retainers are correctly aligned as you insert them into the groove.

Note

► If a retainer is not supplied with the new wiper blade, use the retainer from Note

► If a retainer is not supplied with the new wiper blade, use the retainer from the old blade.

    See also:

    Ignition switch
    [For vehicles equipped with the keyless operation system] For information on operations for vehicles equipped with the keyless operation system, refer to “Keyless operation system: Ignition swit ...

    Selector lever position display
    When the ignition switch is turned to the “ON” position, the position of the selector lever is indicated in the multi-information display. ...

    Front passenger’s airbag ON-OFF switch
    The front passenger’s airbag ON-OFF switch can be used to disable the front passenger’s airbag. If you have a rearward facing child restraint system that cannot be fitted to any seat other tha ...