General maintenanceGeneral maintenance  - Maintenance - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

Fuel, engine coolant, oil and exhaust gas leakage

Look under the body of your vehicle to check for fuel, engine coolant, oil and exhaust gas leaks.

► If you see a suspicious fuel leak or if you smell fuel, do not operate the Warning

► If you see a suspicious fuel leak or if you smell fuel, do not operate the vehicle; we recommend you to call for assistance.

Exterior and interior lamp operation

Operate the combination lamp switch to check that all lamps are functioning properly.

If the lamps do not illuminate, the probable cause is a blown fuse or defective lamp bulb. Check the fuses first. If there is no blown fuses, check the lamp bulbs.

For information regarding the inspection and replacement of the fuses and the lamp bulbs, refer to “Fuses” and “Replacement of lamp bulbs”.

If the fuses and bulbs are all OK, we recommend you to have your vehicle checked and repaired.

Meter, gauge and indicator/warning lamps operation

Run the engine to check the operation of all meters, gauges, and indicator/warning lamps.

If there is anything wrong, we recommend you to have your vehicle inspected.

Hinges and latches lubrication

Check all latches and hinges, and, if necessary, have them lubricated.

    See also:

    Coat hook
    There is a coat hook on the rear seat assist grip of the driver’s side. WARNING • Do not put a hanger or any heavy or pointed object on the coat hook. If the curtain airbag was activated, a ...

    Rear window demister switch
    The rear window demister switch can be operated when the engine is running. Push the switch to turn on the rear window demister. It will be turned off automatically in about 20 minutes. To turn off ...

    Deactivation
    You can deactivate the system by pressing the “Auto Stop & Go (AS&G) OFF” switch. Then the “ ” display/indicator will turn on. ...