Passenger compartment (LHD vehicles)Passenger compartment (LHD vehicles)  - Fuse block location - Fuses - Maintenance - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The fuse blocks in the passenger compartment are located behind the fuse lid in front of the driver’s seat at the position shown in the illustration.

A- Main fuse block

A- Main fuse block
B- Sub fuse block

1. Open the fuse lid and pull to remove it.

2. On vehicles with bottom cover, use the puller to loosen the 2 clips (A) and

2. On vehicles with bottom cover, use the puller to loosen the 2 clips (A) and push down the bottom cover. The puller is in the fuse box in the engine compartment. Refer to “Fuse replacement”.

Warning

► On vehicles with driver’s knee airbag, when changing fuses, do not damage Warning

► On vehicles with driver’s knee airbag, when changing fuses, do not damage the driver’s knee airbag harness or accidentally strike the airbag area with hard objects.
Improper work methods could result in an accidental deployment of the driver’s knee airbag or could turn the driver’s knee airbag inoperable. Either of these situations could result in serious injury or death.

3. To put back the fuse lid, line up the fuse lid hook (B) with the clamp (C) on the instrument panel and push the lid back in.

Passenger compartment (RHD vehicles)

    See also:

    Ride & Handling
    The Outlander's steering response is one of its best attributes. The wheel has a nice weight to it — heavy enough, without being a chore to turn — and the Outlander reacts quickly to steering- ...

    Weights (Hatchback)
    Sedan Hatchback ...

    Cargo room lamp
    When replacing the bulb, put the cargo room lamp switch into the “OFF” position. 1. Insert a straight blade (or minus) screwdriver with a cloth over its tip into the notch of the lamp assembly ...