Position lamps (for vehicles equipped with high intensity discharge headlamps)
1. To create enough work space, turn the steering wheel all the way in the direction opposite to the side you wish to replace.
2. Remove the clips (A) and screws (B) to turn up the cover (C).
3. Turn the socket (D) anticlockwise to remove it.
4. Pull the bulb out of the socket.
5. To install the bulb, perform the removal steps in reverse.
See also:
Operation of the automatic transmission INVECS-II
CAUTION
(1) Before selecting a gear with the engine running and the vehicle stationary,
fully depress the brake pedal to prevent the vehicle from creeping. The vehicle
will begin to move as soon ...
Licence plate lamps
Remove the lens mounting screws, remove the lens, then remove the bulb by pulling
out. ...
Bottle holder
Caution
► Do not drink beverages while driving the vehicle; doing so could distract
you and result in an accident.
► Beverages can spill due to vibration or other movement during vehi ...