Reversing lampsReversing lamps  - Rear combination lamps - Replacement of lamp bulbs - Maintenance - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

1. Insert a straight blade (or minus) screwdriver with the end covered with a cloth or other object into the cut out area of the cover and pry gently to remove the cover.

2. Remove the socket and bulb assembly by turning it anticlockwise.

2. Remove the socket and bulb assembly by turning it anticlockwise.

3. Remove the bulb by pulling it out.

3. Remove the bulb by pulling it out.

4. To install the bulb, perform the removal steps in reverse.

4. To install the bulb, perform the removal steps in reverse.

► When installing the lid, align the tab on the lid with the hole on the vehicle Note

► When installing the lid, align the tab on the lid with the hole on the vehicle side.

Rear fog lamp

    See also:

    Hazard warning flasher switch
    Use the hazard warning flasher switch when the vehicle has to be parked on the road for any emergency. The hazard warning flashers can always be operated, regardless of the position of the igni ...

    Mitsubishi Carisma Review
    The Carisma may not stand out from the crowd on looks, but when it comes to offering top notch value for money and providing thoroughly capable and reliable family transport, it's one of the best. ...

    Temperature control dial
    Turn the temperature control dial clockwise or anticlockwise. Note ► While the engine coolant temperature is low, the temperature of the air from the heater will be cool/cold until the engi ...