Rear fog lamp
1. Remove the socket and bulb assembly by turning it anticlockwise.
2. Remove the bulb by pulling it out.
3. To install the bulb, perform the removal steps in reverse.
See also:
To activate
1. Push the main switch (A) at the end of the auto–speed control lever. 2.
Pull down the lever (B) while driving at the desired speed.
When the main switch (A) is ON, the “CRUISE” indicat ...
Bulb capacity
When replacing a bulb, use a new bulb with the same wattage and colour.
Outside
Except for vehicles equipped with high intensity discharge headlamps
1. Front turn-signal lamps: 21 W (WY21W)
2. H ...
To listen to a tape
1- Cassette slot 2- TAPE button 3- Cassette eject button 4/5- PROG (Program
selector, Fast-forward/Fast-rewind) buttons 6- MTL (Tape selector) button 7-
(Dolby noise reduction) button 8-
Tape ...