Licence plate lamps
1. Remove while pressing the lamp unit (A) to the left side.
2. Insert a minus screwdriver with the end covered with a cloth or other object to press the hook (B) aside and remove the lens.
3. Remove the bulb by pulling it out.
4. To install the bulb, perform the removal steps in reverse.
Note
► When installing the lamp, insert tab (C) first then align and insert tab (D).
See also:
Steering wheel lock
To lock
Turn the steering wheel until it is locked.
To unlock
Turn the ignition switch to the “ACC” position while moving the steering wheel
slightly right and left.
Caution
► Carr ...
Important operation tips for the air conditioning
• Park the vehicle in the shade.
Parking in the hot sun will make the vehicle inside extremely hot, and it will
require more time to cool the interior.
If it is necessary to park in the sun, ope ...
To operate
To operate the system, move the gearshift lever or selector lever to the “R”
position while the ignition switch or the operation mode is in ON. To stop the operation,
push the “SONAR” swit ...