Engine numberEngine number  - Vehicle labeling - Specifications - Mitsubishi Lancer Owner's Manual - Mitsubishi Lancer

The engine number is stamped on the engine cylinder block as shown in the illustrations.

1600 models

: Front of the vehicle

: Front of the vehicle

Except for 1600 models

: Front of the vehicle

: Front of the vehicle

    See also:

    Setting the system
    1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch. 2. Get out of the vehicle. Close all doors and rear ha ...

    Headlamp levelling switch
    The angle of the headlamp beam varies depending upon the load carried by the vehicle. The headlamp levelling switch can be used to adjust the headlamp illumination distance (when the lower beam ...

    Heated seats*
    The heated seats can be operated with the ignition switch in the “ON” position. A– For driver’s switch B– For passenger’s switch 1- Heater high (for quick heating) 2- Heater off 3- Hea ...