General information
See also:
Dipper (High/Low beam change)
When the lamp switch is in the
position, the beam changes from high to low (or low to high) each time the lever
is pulled fully (1). While the highbeam is on, the high-beam indication lamp in
t ...
If your vehicle needs to be towed
If towing is necessary, we recommend you to have it done by your MITSUBISHI MOTORS
Authorized Service Point or a commercial tow truck service.
In the following cases, transport the vehicle using a ...
Bleeding the fuel system (diesel-powered vehicles only)
The fuel system should be bled to remove air as described below if the fuel supply
is exhausted during travel.
1. Undo the four clips on the air cleaner and push the cover (B) aside.
2. Press ...