If the keyless operation key is not operating properlyIf the keyless operation key is not operating properly  - Keyless operation system - Locking and unlocking - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Insert the keyless operation key into the key slot in the glove box. Starting the engine and changing the operation mode should now be possible.

Remove the keyless operation key from the key slot after starting the engine or changing the operation mode.

NOTE

• Do not insert into the key slot anything other than the keyless operation key. NOTE

• Do not insert into the key slot anything other than the keyless operation key. This could cause damage or a malfunction.
• Remove the object or additional key from the the keyless operation key before inserting the key into the key slot.

The vehicle may not be able to receive the registered ID code from the registered key.

Therefore, the engine may not start and the operation mode may not change.

Keyless operation key reminder

If the operation mode is in OFF and the driver’s door is opened with the keyless

If the operation mode is in OFF and the driver’s door is opened with the keyless operation key in the key slot, a warning is issued with the warning display and the buzzer buzzing for approximately 3 seconds to remind you to remove the key.

    See also:

    Front/Rear ashtray (moveable)
    To use the moveable ashtray, open the lid. Mounting position for moveable ashtray The moveable ashtray can be fitted at the indicated position. Refer to “Cup holder”. ...

    Power steering fluid
    To check the fluid level Check the fluid level in the reservoir while the engine is idling. Check to make certain that the power steering fluid level is always between the “MAX” and “MIN ...

    Auto–speed (cruise) control*
    Auto–speed control is an automatic speed control system to maintain a desired driving speed of about 40 km/h or more without operating the accelerator pedal. This feature is especially useful f ...