Alarm activationAlarm activation - Security alarm system - Locking and unlocking - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

When the system is in the system armed mode, the alarm will be activated as follows if the vehicle is unlocked or if any of the doors, tailgate or bonnet is opened using a method other than the keyless entry system or the keyless operation function.

1. The alarm will be activated for approximately 30 seconds. The turn-signal lamps will blink, and the siren will sound intermittently.

2. The alarm will resume if unlawful actions are taken again, even if the alarm

2. The alarm will resume if unlawful actions are taken again, even if the alarm has stopped.

• During an alarm operation, the alarm is displayed on the information screen NOTE

• During an alarm operation, the alarm is displayed on the information screen in the multiinformation display.

Type 1

Type 2

Type 2

Cancelling the alarm

    See also:

    Running-in recommendations
    During the running-in period for the first 1,000 km (620 miles), it is advisable to drive your new vehicle using the following precautions as a guideline to aid long life as well as future economy ...

    Selector lever position display screen (vehicles with CVT)/ Gearshift lever position display screen (vehicles with Twin Clutch SST)
    Shows the position of the selector lever or gearshift lever. Refer to “Selector lever operation”. Refer to “Gearshift lever position display”. ...

    Child-protection rear doors
    1- Lock 2- Unlock Child protection helps prevent the rear doors from being opened accidentally from the inside. If the lever is set to the locked position, the rear door cannot be opened using ...