Caution for installing the child restraint on vehicles with a front passenger airbagCaution for installing the child restraint on vehicles with a front passenger airbag - Child restraint - Seat and seat belts - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Mitsubishi ASX / Mitsubishi ASX Owner's Manual / Seat and seat belts / Child restraint / Caution for installing the child restraint on vehicles with a front passenger airbag

The label shown here is attached on vehicles with a front passenger airbag.

WARNING

• Extreme Hazard! Do not use a rearward facing child restraint on a seat protected WARNING

• Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an airbag in front of it!

• The labels may be in different positions depending on the vehicle model. NOTE

• The labels may be in different positions depending on the vehicle model.

Use rearward facing child restraints in the rear seat or turn off the front passenger’s airbag ON-OFF switch. (Refer to “To turn an airbag off”.)

WARNING

• A REARWARD FACING CHILD RESTRAINT must NOT be used in the front passenger WARNING

• A REARWARD FACING CHILD RESTRAINT must NOT be used in the front passenger seat if the front passenger’s airbag has not been deactivated.

The force of an inflating airbag could kill or cause serious injuries to the child. A rearward facing child restraint should be used in the rear seat.

• A FORWARD FACING CHILD RESTRAINT should be used in the rear seat whenever possible; if used in the front seat, turn off the front passenger’s airbag ON-OFF switch.

    See also:

    Deployment of front airbags and driver's knee airbag
    The front airbags and driver’s knee airbag ARE DESIGNED TO DEPLOY when… The front airbags and driver’s knee airbag are designed to deploy when the vehicle suffers a moderate to severe frontal ...

    To unlock the doors and rear hatch
    You can select the function to unlock the doors and rear hatch either using the ignition switch position or using the selector lever position (CVT) or the gearshift lever position (Twin Clutch SST ...

    To listen to the radio
    1. Press the PWR switch (1) or the AM/FM button (2) to turn ON the radio. Press the PWR switch again to turn OFF the radio. 2. Press the AM/FM button (2) to select the desired band. 3. Turn the TUN ...