Caution for installing the child restraint on vehicles with a front
passenger airbag
(SRS) - airbag - Seat and seat belts - Mitsubishi ASX Owner's Manual - Mitsubishi ASX" border="0" width="100" align=right>
The label shown here is attached on vehicles with a front passenger airbag.

WARNING
• Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an airbag in front of it!
NOTE
• The labels may be in different positions depending on the vehicle model.
See also:
Changing the function settings (when the ignition switch or the operation
mode
is ON)
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into the “P” (PARK) position (CVT ...
Installing a child restraint system to a 3-point type seat belt (with emergency
locking mechanism)
Installation:
1. Fasten the seat belt to secure the child restraint system. Make sure you hear
a “click” when you insert the latch plate in the buckle.
2. Remove all slack by using the locki ...
Vehicles with rain sensor
The windscreen wipers can be operated with the ignition switch in the “ON” or
“ACC” position.
If the blades are frozen to the windscreen, do not operate the wipers until the
ice has melte ...
