Multi-information displayMulti-information display  - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Always stop the vehicle in a safe place before operating.

The following information is included on the multi-information display: warnings, odometer, tripmeter, service reminder, engine coolant temperature, fuel remaining, outside temperature, selector lever position, 4WD operation status, average and momentary fuel consumption, driving range, average speed and meter illumination.

It is also possible to change elements such as the language and units used on the multi-information display.

1- mark display screen (when the ignition switch or the operation mode is

1- mark display screen (when the ignition switch or the operation mode is OFF) ®
2- Information screen (when the ignition switch or the operation mode is OFF) ®

Interrupt display screen (when the ignition switch or the operation mode is OFF) ®

3- Door ajar warning display screen (when the ignition switch or the operation mode is OFF) ®
4- Drive mode indicator display screen* ®
5- mark display screen (when the ignition switch or the operation mode is ON) ®
8- Selector lever position display screen* ®
9- Outside temperature display screen ®
10- Fuel remaining display screen ®
11- Engine coolant temperature display ®
12- Gearshift indicator display screen* ®
13- Auto Stop & Go (AS&G) display screen* ®

Auto Stop & Go (AS&G) OFF display screen* ®

6- Active Stability Control (ASC) OFF display screen* ®
7- Information screen (when the ignition switch or the operation mode is ON) ®

Interrupt display screen (when the ignition switch or the operation mode is ON) ®

• The fuel units, temperature units, display language, and other settings can NOTE

• The fuel units, temperature units, display language, and other settings can be changed.

Refer to “Changing the function settings (when the ignition switch or the operation mode is ON)”.

• The display screen is different depending on whether the ignition switch or the operation mode is OFF or ON.

Refer to “Information screen (when the ignition switch or the operation mode is OFF)”.

Refer to “Warning display list (when the ignition switch or the operation mode is OFF)”.

Refer to “Information screen (when the ignition switch is turned from the “LOCK” position to the “ON” position or the operation mode is changed from OFF to ON)”.

Refer to “Information screen (when the ignition switch or the operation mode is ON)”.

Refer to “Warning display list (when the ignition switch or the operation mode is ON)”.

See also:

How to change a tyre
Before changing a tyre, first stop your vehicle in a safe, flat location. 1. Park the vehicle on level and stable ground, free of loose pebbles, etc. 2. Set the parking brake firmly. 3. On vehicles ...

TP (Traffic information Program) search function
The traffic information program standby function is turned on (with the TP indicator (11) shown on the display) and after about 45 seconds since the RDS indicator (9) turns off due to weak signal ...

How to adjust the tune
Manual tuning The frequency changes every time the TUNE/SEEK button (6 or 7) is pressed. Press the button to select the desired station. Automatic tuning After keeping the TUNE/SEEK button (6 or ...