Odometer/TripmeterOdometer/Tripmeter  - Multi-information display - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Each time you lightly press the multi-information meter switch, the display screen switches.

Odometer/Tripmeter → Service reminder → Redisplay of a→ Odometer/Tripmeter warning display screen → Odometer/Tripmeter → Service reminder → Redisplay of a warning display screen → Odometer/Tripmeter Odometer

Odometer

The odometer indicates the distance travelled.

Tripmeter

The tripmeter indicates the distance travelled between two points.

Example usage of tripmeter It is possible to measure two currently and tripmeter travelled distances, from home using tripmeter It is possible to measure two currently travelled distances, from home using tripmeter way using tripmeter . and from a particular point on the way using tripmeter To reset the tripmeter.

To reset the tripmeter

To return the display to 0, hold down the multi-information meter switch for about 2 seconds or more. Only the currently displayed value will be reset.

Example

If tripmeter tripmeter  will be reset. is displayed, only tripmeter will be reset.

NOTE

• If there is no warning display, the switching sequence is: Odometer/Tripmeter NOTE

• If there is no warning display, the switching sequence is: Odometer/Tripmeter → Service reminder → Odometer/Tripmeter → Odometer/ Tripmeter .→ Service reminder → Odometer/Tripmeter • Both tripmeters  and.

• Both tripmeters can count up to 9999.9 km (9999.9 miles). and When a tripmeter goes past 9999.9 km (9999.9 miles), it returns to 0.0 km (0.0 can count up to 9999.9 km (9999.9 miles).

When a tripmeter goes past 9999.9 km (9999.9 miles), it returns to 0.0 km (0.0 miles).

• When disconnecting the battery terminal, the memories of tripmeter display are erased, and their displays return and display to 0.0 km (0.0 miles). are erased, and their displays return to 0.0 km (0.0 miles).

Service reminder

Service reminder

This displays the distance and number of months until the next periodic inspection.

Refer to “Service reminder”.

    See also:

    Changing the function settings (when the ignition switch or the operation mode is ON)
    1. Stop the vehicle in a safe place. Firmly apply the parking brake and put the gearshift lever into the “N” (Neutral) position (M/T) or the selector lever into the “P” (PARK) position (CVT ...

    Fuel, engine coolant, oil and exhaust gas leakage
    Look under the body of your vehicle to check for fuel, engine coolant, oil and exhaust gas leaks. WARNING If you see a suspicious fuel leak or if you smell fuel, do not operate the vehicle; call ...

    Head restraints
    WARNING (1) The head restraints can only protect you if they are correctly adjusted. (2) A cushion or similar device should not be placed on the seatback as it may increase the distance between y ...