Interrupt display screen (when the ignition switch or the operation mode is OFF)Interrupt display screen (when the ignition switch or the operation mode is<span lang= OFF) - Multi-information display - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX" border="0" width="100" align=right>

Mitsubishi ASX / Mitsubishi ASX Owner's Manual / Instruments and controls / Multi-information display / Interrupt display screen (when the ignition switch or the operation mode is OFF)

When there is information to be announced, such as lamp reminders, the buzzer sounds and the multiinformation display switches to the warning display screen. Refer to the appropriate page and take the necessary measures.

When the cause of the warning display is eliminated, the warning display goes out automatically.

Refer to “Warning display list (when the ignition switch or the operation mode is OFF)”.

1- Information generated

1- Information generated
2- Cause eliminated

To return to the screen displayed before the warning display

Even if the cause of the warning display is not eliminated, you can return to the screen that was displayed before the warning display

If you press the multi-information meter switch, the display screen switches to the screen that was displayed before the warning display and the mark (A) is displayed.

NOTE

• Warning display screens with a NOTE

• Warning display screens with a mark displayed in the upper right of the screen can be switched. If you want to mark displayed in the upper right of the screen can be switched. If you want to switch the display, press the multi-information meter switch as follows.

: Press lightly.

Redisplay of a warning display screen: Press for about 2 seconds or more.

Redisplay of a warning display screen

When the if you lightly press the multi-information meter switch a few times, the warning mark is displayed, if you lightly press the multi-information meter switch a few times, the warning display screen you switched from is displayed again.

Refer to “Information screen (when the ignition switch or the operation mode is OFF)”.

    See also:

    USB input terminal
    You can connect your USB memory device or iPod to play music files stored in the USB memory device or iPod. The following explains how to connect and remove a USB memory device or iPod. Refer to t ...

    System preparation mode (approx. 20 seconds)
    (The buzzer sounds intermittently and the security indicator (A) blinks.) The system preparation time extends from the point at which all of the doors and rear hatch are locked by pressing the LO ...

    To deactivate
    The set speed driving can be deactivated as follows: ► Press the “ON OFF” switch (A). (Cruise control will be turned off.) ► Press the “CANCEL” switch (D). ► Depress the ...