Drive mode indicator display screenDrive mode indicator display screen  - Multi-information display - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

This displays the 4WD status.

This displays the 4WD status.

If you select “4WD LOCK” mode with the drive mode selector, “4WD LOCK” is displayed; if you select “4WD AUTO” mode, “4WD” is displayed.

Nothing is displayed when 2WD mode is selected.

Refer to “Drive mode selector”.

mark display screen (when the ignition switch or the operation mode is ON) mark display screen (when the ignition switch or the operation mode is ON)

This is displayed when you press the multi- information meter switch and switch the warning display screen.

This mark is also displayed if there is another warning other than the one displayed.

When the cause of the warning display is eliminated, the NOTE mark goes out automatically.

• When the  mark is displayed, NOTE

• When the the warning display screen can be redisplayed on the information screen. mark is displayed, the warning display screen can be redisplayed on the information screen.

Refer to “Information screen (when the ignition switch or the operation mode is OFF)”.

Refer to “Information screen (when the ignition switch or the operation mode is ON)”.

    See also:

    Fuel remaining display screen
    This displays the amount of fuel remaining. CAUTION • For petrol-powered vehicles, do not run out of fuel, or the catalytic converter may be adversely affected. If the warning display appear ...

    Assist grip
    These grips are to support the body by hand while seated in the vehicle. Caution ► Do not use the assist grips when getting into or out of the vehicle. The assist grips could detach and ca ...

    On a flooded road
    (1) Avoid flooded roads. Water could enter the brake discs, resulting in temporarily ineffective brakes. In such cases, lightly depress the brake pedal to see if the brakes operate properly. If th ...