Lamps (headlamps, fog lamp, etc.) auto-cutout function
• If the following operation is performed while the lamp switch is in the
position, the lamps will automatically
go out when the driver’s door is opened.
[Except for vehicles equipped with keyless operation system]
The ignition switch is turned to the “LOCK” or “ACC” position, or the key is removed from the ignition switch.
[For vehicles equipped with keyless operation system]
The operation mode is in OFF or ACC.
[When the engine was started using the key]
• If the key is removed and the driver’s door is opened, a buzzer sounds at a high pitch intermittently to remind the driver to turn off the lamps.
[When the engine was started using the keyless operation function]
If the operation mode is put in OFF and the driver’s door is opened, a buzzer sounds at a high pitch intermittently to remind the driver to turn off the lamps.
• If the following operation is performed while the lamp switch is in the
position, the lamps will remain on
for about 3 minutes while the driver’s door is shut and will then automatically
go out.
[Except for vehicles equipped with keyless operation system]
The ignition switch is turned to the “LOCK” or “ACC” position, or the key is removed from the ignition switch.
[For vehicles equipped with keyless operation system]
The operation mode is in OFF or ACC.
NOTE
• The lamp auto-cutout will not function when the lamp switch is in the
position.
• The lamp auto-cutout function can also be disabled.
For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.
Refer to the separate owner’s manual for details.
When you want to keep the lamps on:
1. In the following cases, turn the lamp switch to the “OFF” position.
[Except for vehicles equipped with keyless operation system]
The ignition switch is in the “LOCK” or “ACC” position.
[For vehicles equipped with keyless operation system]
The operation mode is in OFF or ACC.
2. Turn on the lamps with the switch in the
position again, then the lamps will
remain on.
NOTE
• When the engine was started using the key, if the driver’s door is opened and the key is removed, the lamp monitor buzzer sounds at a high pitch intermittently.
The buzzer stops when the driver’s door is closed. (The warning is also displayed on the multi-information display.) The buzzer stops in the following manner.
• Turn the lamp switch to the “OFF” position.
• Close the driver’s door.
• When the engine was started using the keyless operation function, if the driver’s door is opened and the operation mode is put in OFF, the lamp monitor buzzer sounds at a high pitch intermittently.
The buzzer stops when the driver’s door is closed. (The warning is also displayed on the multi-information display.) The buzzer stops in the following manner.
• Turn the lamp switch to the “OFF” position.
• Close the driver’s door.
See also:
Modification / alterations to the electric or fuel systems
MITSUBISHI has always manufactured safe, high quality vehicles. In order to maintain
this safety and quality, it is important that any accessory that is to be fitted,
or any modifications carried ...
Replacing tyres and wheels
Caution
► Avoid using different size tyres from the one listed and the combined use
of different types of tyres, as this can affect driving safety.
Refer to “Tyres and wheels”.
► ...
Cleaning the exterior of your vehicle
If the following is left on your vehicle, it may cause corrosion, discolouration
and stains, wash the vehicle as soon as possible.
• Seawater, road deicing products.
• Soot and dust, iron powd ...