Dipper (High/Low beam change)
When the lamp switch is in the position, the beam changes from high to low (or low to high) each time the lever is pulled fully (1). While the high beam is on, the high-beam indication lamp in the instrument cluster will also illuminate.
See also:
Stop and tail lamps and rear turn-signal lamps
1. Insert a straight blade (or minus) screwdriver with the end covered with a
cloth or other object at the edge of the cover and pry gently to remove the cover.
2. Remove the socket and bulb asse ...
To unfasten
Hold the latch plate and push the button on the buckle.
Note
► As the belt retracts automatically, keep holding the latch plate while retracting
so that the belt stows slowly. Failure to ...
Traction control (TCL)*
On slippery surfaces, traction control (TCL) prevents the drive wheels (front
wheels) from excessive spinning, thus helping the vehicle to start easily. ...