Welcome lightWelcome light - Combination headlamps and dipper switch - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

This function turns on the position and tail lamps for about 30 seconds after the UNLOCK switch (A) on the remote control transmitter is pressed when the combination headlamps and dipper switch is in the “OFF” or “AUTO” position (for vehicles equipped with the automatic lamp control).

On vehicles equipped with automatic lamp control, the welcome light function will operate only when it is dark outside the vehicle.

NOTE

• While the welcome light function is operating, perform one of the following NOTE

• While the welcome light function is operating, perform one of the following operations to cancel the function.

• Push the LOCK switch (B) on the remote control transmitter.

• Turn the combination headlamps and dipper switch to the

• Turn the combination headlamps and dipper switch to the • Turn the ignition switch to the “ON” position or put the operation mode in position.

• Turn the ignition switch to the “ON” position or put the operation mode in ON.

• It is possible to modify functions as follows:

• The headlamps can be set to come on in the low beam setting instead of the position and tail lamps.

• The welcome light function can be deactivated.

For further information, please contact your MITSUBISHI MOTORS Authorized Service Point.

On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment. Refer to the separate owner’s manual for details.

    See also:

    Parking brake break-in
    Break-in the parking brake linings whenever the brake performance of the parking brake is insufficient or whenever the parking brake linings and/or discs are replaced, in order to assure the best ...

    During cold weather
    To ensure proper operation of the washers at low temperatures, use a fluid containing an anti–freezing agent. ...

    Cigarette lighter
    The cigarette lighter can be used while the ignition switch is in the “ON” or “ACC” position. 1- Push all the way in. The cigarette lighter will automatically return to its original posi ...