Headlamp levelling switch (except for vehicles with discharge headlamps)
The angle of the headlamp beam varies depending on the load carried by the vehicle.
The headlamp levelling switch can be used to adjust the headlamp illumination distance (when the lower beam is illuminated) so that the headlamps’ glare does not distract other drivers.
Set the switch according to the following table.
CAUTION
• Always perform adjustments before driving.
Do not attempt to adjust while driving, as it could cause an accident.
Switch position 0- Driver only/Driver + 1 front passenger
Switch position 1- 5 passengers (including driver)
Switch position 2- 5 passengers (including driver) + Full luggage loading
Switch position 3- Driver + Full luggage loading
See also:
Cargo loads precautions
Caution
► Do not load cargo or luggage higher than the top of the seatback. Be sure
that your cargo or luggage cannot move once your vehicle is moving.
Having the driver’s vision blocked, ...
Tools and jack
Storage
The tools and jack are stowed in the luggage compartment.
The storage location of the tools and jack should be remembered in case of an
emergency.
1- Tools
2- Jack
Tools
1- Tool ca ...
Parking brake
To park the vehicle, first bring it to a complete stop, fully engage the parking
brake and then move the gear shift lever to 1st (on an uphill) or Reverse (on a
downhill) position, for vehicles ...