Turn-signal lever
1- Turn-signals
When making a normal turn, use position (1). The lever will return automatically when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to change a lane, the turn-signal lamps and indication lamp in the instrument cluster will only flash while the lever is operated.
Also, when you move the lever to (2) slightly then release it, the turn-signal lamps and indication lamp in the instrument cluster will flash 3 times.
NOTE
• If the lamp flashes unusually quickly, the bulb in a turn-signal lamp may have
burned out. We recommend you to have the vehicle inspected.
• It is possible to activate the following functions.
• Flashing of the turn-signal lamps when the lever is operated with the ignition
switch or the operation mode is in ACC.
• Deactivate the turn-signal lamp 3-flash function for lane changes.
• The time required to operate the lever for the 3-flash function can be adjusted.
For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.
On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.
Refer to the separate owner’s manual for details.
See also:
Changing the momentary fuel consumption display (Type 2)
It is possible to change the bar graph setting of the momentary fuel consumption
display.
1. Press and hold the multi-information meter switch for about 2 seconds or more
to switch from the setti ...
Pretensioner system
The pretensioner system will retract their respective seat belts instantaneously,
thus maximizing the seat belt’s effectiveness, if there is a frontal impact severe
enough to injure the driver a ...
Engine specifications
1: Vehicles for Belgium, Norway
2: Vehicles equipped with the high power engine
3: Vehicles equipped with the low power engine ...