Hazard warning flasher switchHazard warning flasher switch  - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

Use the hazard warning flasher switch when the vehicle has to be parked on the road for any emergency.

The hazard warning flashers can always be operated, regardless of the ignition switch position or the operation mode.

Push the switch to turn on the hazard warning flashers, all turn-signal lamps flash continuously. To turn them off, push the switch again.

NOTE

• While the hazard warning lamps are blinking due to having manually pushed the NOTE

• While the hazard warning lamps are blinking due to having manually pushed the switch, the emergency stop signal system does not operate.

Refer to “Emergency stop signal system”.

    See also:

    Temperature control dial
    Turn the temperature control dial clockwise or anticlockwise. Note ► While the engine coolant temperature is low, the temperature of the air from the heater will be cool/cold until the engi ...

    Refill capacities
    ...

    Horn switch
    Press the steering wheel on or around the mark. ...