Operation from outside the vehicle
Insert (or remove) the key when the boot lid (or tailgate) key cylinder is in the vertical or the horizontal position.
Rotate the key to lock or unlock as shown in the illustration.
1- Unlock
2- Lock
3- Always lock
NOTE
If the key cylinder remains ”Always lock” in position (3), the boot lid (or tailgate) cannot be unlocked by the central door lock operation.
To open
Push the boot lid (or tailgate) key cylinder (A) when the key cylinder is in the unlocked position.
To close
Press the boot lid (or tailgate) down until it is closed, and turn the key to lock position.
NOTE
Gas springs (B) are installed in the locations illustrated in order to support the tailgate. Please observe the following in order to prevent damage or faulty operation.
- Do not attach any plastic material, tape, etc., to the gas springs.
- Do not tie string, etc., around the gas springs.
- Do not pull on the gas springs when closing the tailgate or hang items from the gas springs.
See also:
High-beam indication lamp
This indication lamp illuminates when the high-beam is used. ...
Driving, alcohol and drugs
Driving after drinking alcohol is one of the most frequent causes of accidents.
Your driving ability can be seriously impaired even with blood alcohol levels
far below the legal minimum.
If you ha ...
When a malfunction occurs in the CVT
There could be a system malfunction if the
warning display or the
warning display is displayed on the
information screen in the multi-information display.
Caution
► If malfunction occ ...