Rear window wiper and washerRear window wiper and washer  - Wiper and washer switch - Instruments and controls - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

The rear window wiper and washer switch can be operated with the ignition switch or the operation mode in ON or ACC.

INT- The wiper operates continuously for several seconds then operates intermittently

INT- The wiper operates continuously for several seconds then operates intermittently at intervals of about every 8 seconds

OFF- Off

The washer fluid will be sprayed onto the rear window when the knob is turned

The washer fluid will be sprayed onto the rear window when the knob is turned fully in either direction.

The wipers operate automatically several times while the washer fluid is being sprayed.

• The rear window wiper will automatically perform several continuous operations NOTE

• The rear window wiper will automatically perform several continuous operations if the gearshift lever or the selector lever is put in the “R” position while the windscreen wipers or the rear window wiper is operating. (automatic operation mode).

After the automatic operation, the rear window wiper will stop operating if the knob is in the “OFF” position. If the knob is in the “INT” position, the rear window wiper will return to the intermittent operation.

It is possible to set the rear window wiper to perform the automatic operation only if the gearshift lever or the selector lever is put in the “R” position while the rear window wiper is operating with the knob in the “INT” position.

For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.

• If the knob is in the “OFF” position, turn the knob to the “INT” position twice quickly to operate the rear window wiper continuously.

(continuous operation mode) Turn the knob to the “OFF” position to stop the rear window wiper continuous operation.

• The interval for intermittent operation can be adjusted.

For further information, we recommend you to consult a MITSUBISHI MOTORS Authorized Service Point.

On vehicles equipped with MITSUBISHI Multi-Communication System (MMCS), screen operations can be used to make the adjustment.

Refer to the separate owner’s manual for details.

    See also:

    To adjust forward or backward
    Manual type Pull the seat adjusting lever and adjust the seat forward or backward to the desired position, and release the adjusting lever. WARNING • To ensure the seat is locked securely, t ...

    Parking brake break-in
    Break-in the parking brake linings whenever the brake performance of the parking brake is insufficient or whenever the parking brake linings and/or discs are replaced, in order to assure the best ...

    Changing the display language
    The language of the multi-information display can be switched. 1. Press and hold the multi-information meter switch for about 2 seconds or more to switch from the setting mode screen to the menu sc ...