Parking brake
To park the vehicle, first bring it to a complete stop, fully engage the parking brake.
To apply
1- Firmly depress and hold the brake pedal, then pull the lever up without pushing the button at the end of hand grip.
CAUTION
• When you intend to apply the parking brake, firmly press the brake pedal to bring the vehicle to a complete stop before pulling the parking brake lever. Pulling the parking brake lever with the vehicle moving could make the rear wheels lock up, thereby making the vehicle unstable.
It could also make the parking brake malfunction.
NOTE
• Apply sufficient force to the parking brake lever to hold the vehicle stationary after the foot brake is released.
• If the parking brake does not hold the vehicle stationary after the foot brake is released, have your vehicle checked immediately.
To release
1- Firmly depress and hold the brake pedal, then pull the lever up slightly.
2- Push the button at the end of hand grip.
3- Lower the lever fully.
CAUTION
• Before driving, be sure that the parking brake is fully released and brake warning lamp is off.
If you drive without the parking brake fully released, the warning display will appear on the information screen in the multi- information display.
If a vehicle is driven without releasing the parking brake, the brake will be overheated, resulting in ineffective braking and possible brake failure.
Warning lamp
See also:
Windscreen wipers
NOTE
• To ensure a clear rearward view, the rear window wiper will automatically perform
several continuous operations if the gearshift lever or the selector lever is put
in the “R” positi ...
Fuse block location
To prevent damage to the electrical system due to shortcircuiting or overloading,
each individual circuit is provided with a fuse.
There are fuse blocks in the passenger compartment and in the engi ...
Towing bar mounting specifications
See the following table for fixing points (A) for the towing bar.
...