Turbocharger operationTurbocharger operation - Starting and driving - Mitsubishi ASX Owner's Manual - Mitsubishi ASX

• Do not run the engine at high speeds (for example, by revving it or by accelerating CAUTION

• Do not run the engine at high speeds (for example, by revving it or by accelerating rapidly) immediately after starting it.

• Do not stop the engine immediately after high-speed or uphill driving. First allow the engine to idle to give the turbocharger a chance to cool down.

Turbocharger

The turbocharger increases engine power by pushing large amounts of air into the engine’s cylinders.

The finned parts inside the turbocharger turn at extremely high speeds and are subjected to extremely high temperatures. They are lubricated and cooled by engine oil. If the engine oil is not replaced at the specified intervals, the bearings may seize or emit abnormal noise.

1- Air compressor

1- Air compressor
2- Compressed air
3- Cylinder
4- Turbo fin
5- Turbine
6- Exhaust gas

    See also:

    Diesel particulate filter (DPF)
    The diesel particulate filter (DPF) is a device that captures most of the particulate matter (PM) in the exhaust emissions of the diesel engine. The DPF automatically burns away trapped PM during ...

    Procedure for replacing the remote control switch battery
    1. Remove the screw (A) from the remote control switch. 2. With the MITSUBISHI mark facing you, insert the cloth covered tip of a straight blade (or minus) screwdriver into the notch in the remot ...

    Diesel preheat indication lamp (diesel-powered vehicles)
    This indication lamp illuminates when the ignition switch is placed in the “ON” position. As the glow plug becomes hot, the lamp goes out and the engine can be started. Note ► If th ...